VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
Add to Cart
Even temperature Stenter Finishing Machine , horizontal chain , customized
1. Machine Process:
Open width entry ---Fabric Centering device --- Padder --- Auto weft straightener(optional) --- Lower overfeeding ---Screw expending ---Upper overfeeding --- Edge detecting --- Pin on-- Edge-gumming and moisture device ---Chambers for heat setting ---Air cooling --- Edge cutting & suction system --- End section --- Plaiting
2. Technical data:
| Machine width: | 1400-3800mm | Working width: |
1200-3600mm
|
| Heating source: |
nature gas / oil / electricity / steam
|
Width adjustment range: |
700-3600mm
|
|
Chambers quantity.
|
2-10 | Temperature of chamber: |
100-230℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: | above 0.5mpa |
| Overfeed range: |
-10% to 30%
|
Installed power: | Approx 120Kw |
3. Machine Advantages:
Tailored to suit customer requirement.
Quickly heat up the room temperature to the required temperature, thus greatly reduce the dull time and achieve production efficiency.
The drying chamber is made of high density insulating material with 150mm thickness, it can greatly reduce the heat loss to ensure a good stentering effect.
Even at high temperature, it can generate enough air volume and air pressure and guarantee the hot air to penetrate rapidly the fabric by the up and down nozzles, thus achieving perfect stentering effect.
Applications:
This machine is suitable for, Heat setting of fabric, Chemical Finishing on fabric, drying of different textile.