VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
Add to Cart
Advanced textile finishing Machine , Friendly HMI , custom - build
1. Process:
Open width entry --- Fabric positioning device ----Infrared center guider ---- Padder --- Tension applicator ---- Infrared center guider ---- Expanding roller (flat-wired type) ---- Lower overfeeding screw expending ---Upper overfeeding --- Edge detecting & four-finger uncurler device--- Pinning-on ---- Chambers for heat setting ---Air cooling --- Pinning-off ---- End section --- Plaiting & batching.
2. Main technical data:
| Normal width: | 1400-3800mm | Working width: | 1200-3600mm |
| Heat source: |
naturegas/oil/ electricity |
Width adjustment range: | 700-3600mm |
| Chambers No. | 2-10 | Temperature of chamber: | 100-230℃ |
| Fabric held by: | clip/pin/combined | Air pressure: | above 0.5mpa |
| Overfeed range: | -10% to 30% | Installed power: | Approx 120Kw |
3. Stenter functions:
* Heat setting and fix different kinds of textiles.
* To control the fabric width.
* To finishing chemical applying on various types of textile.
* To control the moisture of the textile.
* To control the GSM of the textile.
* To dry fabrics.
* To control the shrinkage of the textile.
* Curing treatment for resin, water repellent fabric is done.