VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
Add to Cart
Simple operation textile stenter Machine , Humanized design , Inverter controlled
1. Stenter functions:
* Heat setting and fix different kinds of textiles.
* To control the fabric width.
* To finishing chemical applying on various types of textile.
* To control the moisture of the textile.
* To control the GSM of the textile.
* To dry fabrics.
* To control the shrinkage of the textile.
* Curing treatment for resin, water repellent fabric is done.
2. Technical data:
| Roller width: | 1400-3600mm | Working width: |
1200-3400mm
|
| Heating source: |
nature gas/ oil/ electricity/steam
|
Width adjustment range: |
700-3400mm
|
|
Chambers No.
|
2-15 pcs | Temperature of chamber: |
100-230℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: | above 0.5mpa |
| Padder type | Finishing/Dyeing | Installed power: |
Approx 140Kw
|
3. Machine features:
1) Drying chambers: To dry the fabric or to fix the finishing chemicals by hot air from the blowers. The blower sucks hot air from radiator and blow it into the nozzles through which drying occurs. Inside the drying chamber also contains width adjustment spindle which can adjust the each chamber's working width, and pin/clip chain track.
2) Gas direct heating system:
It equipped with auto-cut off safety burners, Maxon /Weishaupt/ Reillo brand.
The temperature rising up very fast, short the loading time of the machine.
Anti-explosive door designs in heating chamber.
3) Low pollution, easy to maintenance, the most clean heating system for environmental protection.
4) Humanized designs for double filters in the chambers. The upper layer can be draw out at anytime for cleaning the filters,it also can prevent the dusts to dirty the fabrics.