VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
Add to Cart
Thermal oil heated Stenter finishing machine , Automatic door , Double drive
1. Functions of stenter machine:
1) The stenter do heat setting for lycra fabric, synthetic and blended fabric.
2) The stenter used to control the width of the fabric.
3) The stenter is used to control the GSM of the fabric.
4) The stentering process is to dry textile.
5) The stenter process is trying to control the shrinkage property of the fabric.
2.The machine features:
3. Process:
Open width entry --- Fabric positioning device ----Infrared center guider ---- Padder --- Tension applicator ---- Infrared center guider ---- Expanding roller (flat-wired type) ---- Lower overfeeding screw expending ---Upper overfeeding --- Edge detecting & four-finger uncurler device--- Pinning-on ---- Chambers for heat setting ---Air cooling --- Pinning-off ---- End section --- Plaiting & batching.
4. Main technical data:
| Fabric width | 1200mm-3600mm |
| Roller width | 1400mm-3800mm |
| Chamber door thickness | 150mm |
| Padder type | Slant /vertical padder |
| Main drive | Single drive (22Kw)/Double drive (11Kw x 2) |
| Chamber quantity | As customer required |
| Guide roller diameter | 125mm / 150mm |
| Heating media | Thermal oil/Natural gas/Steam/Electricity or any two combined |
| Entry rail type | Horizontal rail |
| Entry rail length | 3m/6m |
| Exhaust fan No. | Optional |