Coating stenter finishing machine , 4 m each chamber , custom-tailer
1. Technical specifications:
| Normal machine width: |
1400-3600mm |
Fabric working width: |
1200-3400mm
|
| Chamber heating source: |
nature gas/ oil/ electricity/steam
|
Width adjustment range: |
500-3400mm
|
|
Chambers No.
|
As required |
Temperature of chamber: |
100-220℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: |
above 0.5mpa |
| Coating type |
blade coating or foam coating |
Installed power: |
Approx 140Kw
|
2. The stenter Features:
VIROCK new stenter for coating processes & technical textiles
The new type VK-NM stenter from VIROCK introduces a new concept of finishing specifically for coatings and the technical textiles sector. To meet all the requirements for finishing of technical textiles, the VK-NM provides high product quality with complete drying.
The new stenter features 4 m long chambers/modules compared with the standard 3 m long units.
For coating purposes, the extended chamber provides an absolute even temperature distribution over the width and length of the dryer. A single gas burner or heating element and two ventilators per chamber therefore make for example, a coating line comprising three 4 m chambers more economic than four 3 m chambers.
